Washington, UT– Fasst Company and Flexx Handlebar is now accepting rider resumes for the 2011 racing season. We have expanded our rider support program for 2011 and will be accepting rider resumes for all riders and skill levels. You can apply for support until December 1, 2010. We prefer all applications and rider resumes to be sent by email to: ridersupport@fasstco.com. Read the rest of this entry »
Exclusive Interview with Brian Evans @ Spiked Industries
August 13th, 2010
Exclusive Interview with Brian Evans over at Spiked Industries
We met Brian Evans during the ATV DWT series and also at the Indy Dealer show this year and we were impressed with what Spike Industries has been bringing to the Off-Road Industry. After many emails we finally got some time to get to know more about Spiked Industries as we sat down with Brian Evans for a quick chat.
RPM: When did spike industries get started?
Brian: Spiked was founded in 2007 as I was starting college, it began in my parents spare bedroom with money I used from school loans because I couldn’t get business financing at 19.
AirBedz new “Digital Camouflage” design!!!
July 30th, 2010
Just because you live life to the “extreme” doesn’t mean sleeping outdoors has to be extremely uncomfortable.
PITTMAN OUTDOORS, an innovator in outdoor products, would like to introduce AirBedz…The Original Truck Bed Air Mattress.
We offer a variety of air mattresses for pick up truck beds that are comfortable, affordable, compact and easy to use.
AirBedz mattresses come in several different sizes to fit full, and mid sized trucks in long and short bed layouts. Cutouts on each side allow the mattress to fit around and over the wheel wells creating a sleep area that utilizes the entire truck bed. An integrated air coil system evenly distributes weight across a 12-inch thick mattress providing a better night’s sleep to the outdoor enthusiast. Read the rest of this entry »
NEW 2011 HUSQVARNA WR250 & WR300 MODELS
July 28th, 2010
July 22, 2010 – Woodcliff, NJ – At the recent dealer meeting held at Mid-Ohio in conjunction with AMA Vintage Motorcycle Days, Husqvarna took the wraps off a couple more new 2011 models. In a fitting tribute to the AMA’s “Marque Of The Year” brand new WR250 and WR300 demonstrate Husqvarna’s ongoing commitment to two-strokes. The two big brothers to the previously announced 2011 WR150 make for a comprehensive range of serious 2-stroke enduro models. Read the rest of this entry »
New Yamalube® Biodegradable Foam Air Filter Oil and Cleaner Kit
July 1st, 2010June 24, 2010 – KENNESAW, GA
FOAM AIR FILTERS ARE THE MOST OVERLOOKED MAINTENANCE ISSUE, NEGLECT OFTEN LEADS TO EXPENSIVE ENGINE DAMAGE
New Yamalube® Biodegradable Foam Air Filter Oil and Cleaner Kit is
Environmentally Safe, Requires Water Only
Anyone that has spent a day on dusty trails and then taken a look at their air filter can attest that the foamy exterior is likely covered in dirt and debris. Still, cleaning and oiling foam air filters is the most overlooked maintenance issue that motorcycle and ATV technicians see today, and neglect often leads to expensive engine repairs. Read the rest of this entry »
NEW YAMALUBE® FUEL STABILIZER & CONDITIONER
May 17th, 2010
NEW YAMALUBE® FUEL STABILIZER & CONDITIONER PLUS PROTECTS E-10 FUELS FROM DAMAGING OXIDATION AND PHASE SEPARATION
ALCOHOL-FREE FORMULA KEEPS FUEL FRESH, POTENT AND GUM FREE
May 4, 2010 – KENNESAW, GA – The gas you put in your motorcycle or ATV fuel tank begins to go bad as soon as it leaves the nozzle. This is especially true for E-10 fuels that absorb moisture from the air. If enough water is present, either from condensation or contaminated fuel, E-10 will separate into a top layer which is almost all gasoline, and a bottom layer which is almost all ethanol (up to 75%) and water. This separation will make your motorcycle difficult, if not impossible, to start. Read the rest of this entry »
TM Racing introduces the new TM 250- 4stroke EFI for 2010
May 3rd, 2010
Abbotsford- 4/26/10: TM Racing and Barker Bros Cycles are proud to introduce the new TM250- 4 stroke EFI for 2010. TM Racing will offer the EFI as well as carbureted on all MX, Enduro and Motard models. Along with the EFI you get on the Enduro models a 6 speed transmission with electric start for the true off road enthusiast. TM EN250FiES. Read the rest of this entry »
JCR/Honda announces partnership with Affliction clothing
May 1st, 2010
JCR/Honda is pleased to announce a partnership with Affliction clothing for 2010.
Affliction Vision put togethur a must see action packed video of Johnny Campbell talking about racing Baja, Affliction clothing and the future of JCR/Honda.
K&N PowerKleen-“NEW PRODUCT RELEASE”
May 1st, 2010
APPLICATION: Most Surfaces, including Cotton Air Filters
PART No: 99-0621
MSRP: $12.95
PRODUCT SPEC’s: http://www.knfilters.com/search/product.aspx?Prod=99-0621
MSDS: http://www.knfilters.com/msds/Filter%20Cleaner.pdf
Performance Cleaning!… April 2010, K&N Engineering, Inc., Releases a Newly packaged POWER KLEEN™ High Performance Cleaner and Degreaser (99-0621) for your troublesome and demanding cleaning jobs! Read the rest of this entry »
LTE Racing and Quadworx.com Release new Can-Am Intake
March 29th, 2010
The new Quadworx 800 intake was designed by Quinn Schwarz of Quadworx. His original idea was then sent to LTE Racing to be manufactered by a high quality aftermarket ATV Exhaust company. They themselves where blown away at the power increase of this little jewel. From that time till now it has went through dyno testing and races for testing to make sure it was ready. The 800 intake is available for the Outlander and Renegade series. Built with .090 aluminum stamped center,billet flanges and is 100% bolt on stock replacement with a 3 HP increase. Read the rest of this entry »